HEAVY-DUTY ROLLING COULTER

Features a full 20" blade with a yoke-mounted, 4-bolt hub assembly.

48" SWEEPS

Narrower-than-standard V-Blades provide consistent depth in rolling conditions and clean better in "sticky" soils.

21" TREADER WHEEL

7" spacing is ideal for breaking clods, uprooting weeds, and preparing a seedbed. Hard faced for long life.

Exclusive Maintenance-Free Bearings

These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination, which reduces maintenance time and extends the life of the bearings.

Walking Tandems

Walking tandems on all center frames help keep the depth consistent when going over undulations.

Two Sweeps Per Section

Two sweeps per section effectively follow undulations and feature 4" of blade overlap. Leading coulter cuts residue for better trash flow around the V-blade.

Pilot-Operated Check Valve

Lock the cylinders in place and provide consistent depth control across the entire width of the unit.

High & Low Lift Blade Choices

 Narrower, 4½"-wide low-lift blades (top) work at shallower depths, require less horsepower, and conserve valuable soil moisture by reducing the tillage depth needed for effective weed control. The low-lift design also leaves the field smoother than traditional 72" configurations and, in many cases, allows planting directly behind the Plains Plow. The 6½"-wide blades (bottom) are for working deeper. This high-lift design provides more soil separation from weed roots.

Greater Underframe Clearance

Thirty-inches of vertical underframe clearance and pusher rockshaft axles maximize shank clearance when operating in the field.

Effective Frame Design

Heavy-duty I-beam hitch pulls from a true center section to provide unmatched strength that eliminates the center buckling often seen in hinged center-frame designs. Dual-blade wing sections reduce buckling and stay in the ground better than single 72" blade designs.