Monday | 8:30AM - 5:00PM |
Tuesday | 8:30AM - 5:00PM |
Wednesday | 8:30AM - 5:00PM |
Thursday | 8:30AM - 5:00PM |
friday | 8:30AM - 5:00PM |
Saturday | 8:30AM - noon |
Sunday | Closed |
Featuring strong frames, robust gearboxes and rotors, the KRONE rotary tedders perform equally well in hay and heavy crops, Pivot joints on the frame and scores of useful setting options make KRONE rotary tedders the masters of super clean sweeps and quality forage.
KW 7.92, KW 8.82, KW 10.02 and KW 11.22 are mounted to the tractor’s three-point linkage. Dispensing with the transport running gear, the machine is marketed at a very competitive price and still offers a high level of base specification including central border spreading control. One single-acting spool is all that’s needed to operate the KW 7.92. With all rotors spaced at identical distances, the machine produces a uniform spread pattern.
The KRONE KW and KWT rotary tedders are available in various work widths and dimensions. But also the rotor diameters and the number of tine arms on each rotor vary to suit your special needs and requirements. With five tine arms on the small diameter rotor (1.34m), six on the medium-sized rotor (1.53m) and seven on the largest (1.70m/1.80m) rotor, KRONE offers the perfect rotary tedder for every user, every situation and every need. |
The generously overlapping tine arms spread the crop evenly for a uniform spreading pattern in all conditions. Uniform spreads improve wilting and reduce drying times, allowing you to finish the job before weather turns bad. |
The tines are attached to the tine arms with an eccentric plate and adjust to one of three sweeping angles – an option that makes for excellent tedding in all conditions. |
Heavy-duty tine arms (38x4mm tubular steel) and a special ring attachment system combine to provide dependable performance in even the toughest conditions. |
The enclosed liquid-grease lubricated gearboxes that drive the rotors are absolutely maintenance-free. Permanent lubrication gives peace of mind and increases longevity. The chunky box-section chassis absorbs all shock loads on the frame. Mounted beneath the individual sections, the liquid-grease gearboxes drive nothing but the rotors. The same sections guide the rotors on the KW models, which increases the overall stability and takes the load off the gearbox. |
Three-point linkage with stand which folds down to support the machine. The driveshaft is stored in a separate holder on the headstock. The stand locks in place automatically when not in use. |
The internal compression spring (a) prevents underrunning when working downhill and the adjustable brake (b) prevents bouncing. The large machines of a 7.80 m plus work width have additional Eladur spring elements (c), which enhance rides on public roads and bumpy dirt roads. |
Most three-point hitch models require only one double-acting spool. Spring-loaded hydraulic rams ensure smooth lowering on the slope. |
|
Featuring strong frames, robust gearboxes and rotors, the KRONE rotary tedders perform equally well in hay and heavy crops, Pivot joints on the frame and scores of useful setting options make KRONE rotary tedders the masters of super clean sweeps and quality forage. |
The KW 4.62 and KW 5.52 with their 4.6 m and 5.5 m working widths have four rotors each. With their low deadweight, they are perfect for mountain conditions. Thanks to their lower power requirement, these machine are also the ideal outfit for smaller farms. |
|
KW 7.92, KW 8.82, KW 10.02 and KW 11.22 are mounted to the tractor’s three-point linkage. Dispensing with the transport running gear, the machine is marketed at a very competitive price and still offers a high level of base specification including central border spreading control. One single-acting spool is all that’s needed to operate the KW 7.92. With all rotors spaced at identical distances, the machine produces a uniform spread pattern. |
Nobody can afford to waste their crop. KRONE eight-rotor rotary tedders feature a manual border spreading system as standard. A hydraulic border spreading system is standard specification on the KW 10.02 and KW 11.22. The system keeps your crop exactly where it should be - on your field. |
The rotors are folded hydraulically. The outer rotors swing in to reduce the machine’s transport height. |
Warranting top quality forage
|
Thought-through details and high operator comfort boost the efficiency of your operation. The central border spreading facility ensures you are not wasting a single haulm along the boundaries. In addition, it allows you to spread uphill with the machine running at an angle to the tractor. The rotor tilt is adjusted without the need of tools for perfect adaptation to the current crop and yield. |
You can adjust the spreading angle between 13° and 19° by refitting a pin in a hole pattern on the wheel arms. No tool required. The steep spreading angle is perfect for tedding, producing intensively conditioned forage. With its gentler conditioning action, the shallow angle is better when making the headland turn. |