Land Pride's GR1525 Stump Grinder turns large stumps into small chips and has uses and applications with contractors, landscapers and forestry departments.
AR400 Material
Abrasion resistant AR400 skid shoes.
|
FEATURES |
BENEFITS |
Universal quick attach mounting
system |
For quick and easy attachment. |
|
8" Digging depth |
A good depth below the ground. Removes base of most trees. |
|
Adjustable skid shoes |
Adjustable to fit all sizes of skid steers. |
|
Pivoting discharge deflector |
Discharge deflector pivots up while cutting wheel is digging into the ground. |
|
Welded on serrated step |
Good safe step for accessing skid steer operator’s seat. |
|
High speed cutting wheel |
Cuts faster with less vibration. |
|
Permanent hose holders |
Hoses aren’t zip-tied to the frame. Zip ties can break over time. |
|
Replaceable carbide cutting teeth |
Cutting teeth are easy to replace. Carbide tips for extra long life. |
|
Hydraulic hose lines |
Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration. |
|
Case drain hydraulic line |
Protects against component damage. |
Keyed, tapered spindle on end of
hydraulic motor |
Able to draw cutting wheel tight against the tapered shaft providing an excellent
fit-up and less likely to shear the key off |
Cutting wheel designed with
wheel puller access holes |
Makes it easier to pull the cutting wheel off of the motor spindle. |
Attached rain tight manual holding
tube |
Keeps manual with stump grinder for quick easy access. Manual won’t get wet. |
|
Offset articulating arm |
Allow for optimum line-of-s
ite from operator’s seat. | |
Discharge Deflector
Discharge deflector pivots up while the cutting wheel is digging into the ground. The high speed cutting wheel cuts fast with less vibration. |
Replaceable Teeth
Replaceable carbide cutting teeth offer extra long life and are easy to replace.
|
| |
|
Specifications & Capacities
|
|
Mounting Plate |
|
Quick Attach |
|
Main Frame |
in (mm) |
6 x 6 x 1/4 (152 x 152 x 6) Tube |
|
Overall Mounting Width |
in (m) |
48 (1.22) |
|
Overall Length |
in (m) |
60 (1.52) |
|
Overall Weight |
lbs (kg) |
540 (244.9) |
|
Drive And Control System |
|
Hydraulic motor with electric over hydraulic |
|
Hydraulic Requirements |
gpm (Lpm) |
17 to 32 (64.4 to 121.1) |
|
Cutting Wheel Speed |
|
470 to 875 rpm |
|
Articulate Cylinder |
in (cm) |
3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia. |
|
Tilt Cylinder |
in (cm) |
3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia. |
|
Hydraulic Lines & Hoses |
in (mm) |
3/4 (19) I.D. Hydraulic hoses with crimp on cordura sleeve
1/4 (6) I.D. Case drain hydraulic hose |
|
Number of Cutting Teeth
Straight
Left-Hand
Right-Hand
|
|
8 - Replaceable carbide teeth
8 - Replaceable carbide teeth
8 - Replaceable carbide teeth |
|
Cutting Arc |
|
55 Degrees |
|
Maximum Cutting Depth Below Ground |
in (cm) |
8 (20.3) |
|
Greasable Hinge Points |
|
Ye s |
|
Color |
|
Black |
|
Outside Cutting Wheel Diameter |
in (cm) |
23 3/4 (60.3) |
|
Cutting Wheel Thickness |
in (mm) |
1/2 (13) |
|
Maximum Pressure Rating |
psi (mPa) |
3500 (24.1) |
|
Today's HoursWednesday 8:30AM - 5:00PM
Tel: 
22 Callaghan Road, Lindsay, ON K9V 4R4
