clock Today's HoursTuesday 8:30AM - 5:00PM
Monday 8:30AM - 5:00PM
Tuesday 8:30AM - 5:00PM
Wednesday 8:30AM - 5:00PM
Thursday 8:30AM - 5:00PM
friday 8:30AM - 5:00PM
Saturday 8:30AM - noon
Sunday Closed
ID # 18925863

Krone Rear-mounted disc mowers EasyCut R

Videos
Call for Price
Overview

More than just a mower

  • Quick-change blades
  • SafeCut – individual protection for each disc
  • SmartCut: Stripeless cuts and optimal blade overlap
  • Break-back system – the mower breaks back to the rear and up to avoid the obstacle
  • DuoGrip – double guidance and centre-of-gravity suspension
  • Optimum ground pressure control from responsive and adjustable springs
  • Hydraulic ground pressure control on the move (option)
  • CV conditioner with V-steel tines at aggressive angles
  • CR conditioner with chevron-profiled polyurethane rollers
  • Mechanical gearbox for convenient CV conditioner 600 rpm / 900 rpm speed changes
  • Compact in transport as the mower inclines to the middle of the tractor – for optimum weight distribution and visibility
  • Vertical storage on optional stands for minimum space requirements
Specifications
Model
Rear-mounted disc mowers EasyCut R
Year
2021
Sale Type
New
Manufacturer
Krone
duogrip
  • The DuoGrip system suspends the machine in its centre of gravity and gives lateral control
  • Uniform ground pressure across the entire work width
  • Optimum guidance: Less lateral drag, clean cuts
  • Short and heavy-duty beam
A clean cut is fundamental for producing clean forage and it is attributed to the special design of the cutterbar and also of the suspension. The special KRONE DuoGrip suspension system suspends the disc mower in its centre of gravity and provides lateral guidance at the same time. Maintaining a consistent ground pressure across the full work width, the design produces cleanest cuts whilst resulting in light pull and optimum side control.
Spreading the load: The parallelogram linkage absorbs lateral forces and guides the unit in direction of travel. At the same time, it helps reduce the load on the jib and the suspension system at the machine’s centre of gravity.EC F R 15 Seite 15 Bild 0003
Robust: The jib mounts on a pin that pivots in a ball socket, providing plenty of movement and exemplary contouring.EC F R 15 Seite 15 Bild 0003
Suspended in its centre of gravity rather than centrally: Maintaining a uniform pressure across the entire work width is a requirement that is thoroughly met by Krone disc mowers, courtesy of a gearbox that is arranged on the inside of the machine where it shifts the centre of gravity to the side. This, the short jib and two extra braces give maximum stability while keeping the weight down – and delivering best results in rough going.EC F R 15 Seite 14 Bild 0002

 

safecut
  • Full driveline protection
  • Neighbouring discs will not collide
  • No wear and damage
  • Quick roll pin change, minimum costs
Foreign objects can cause great damage and costly repairs. Not so if the KRONE SafeCut is in place, which allows the discs to move away from obstacles for maximum productivity and comfort. Our DLG award winning disc protection system is a base specification on all EasyCut models.
An ideal system: As the discs are spinning, they place no load on the roll pins, because the bearings are tensioned by a nut and two clamping screws. As a result, the roll pins do not suffer from material fatigue and even after many hours of operation they will break only at their inbuilt load level.EC F R 15 Seite 12 Bild 0003
Peace of mind: Instead of transferring the full shockload to the spur gears, the roll pin in the sprocket driveshaft breaks when there is a momentary overload. The pinion shaft continues spinning, jacking up the disc in question and the disc moves out of the risk zone and the orbit of the neighbouring discs. This way SafeCut prevents damage to the spur gears and the neighbouring discs. Replacing the roll pin takes a few minutes and is not very costly.EC F R 15 Seite 13 Bild 0001

 

smartcut
  • Wedge-shaped cutterbar for cleanest cuts
  • Heavy-duty spur gears run in double bearings which are spaced at wide gaps
  • Swathing or spreading
  • Hard-faced skids
The wedge-shaped cutterbar adjusts through a large setting range to cut short stubble in meadows and pastures and longer stubble in longstemmed field crops. EasyCut cuts blockage-free and clean. Benefitting from massive double spur gear bearings that are spaced at large gaps, the cutterbars are heavy-duty and hardwearing.
Forget about stripes With some discs turning in pairs towards each other and others away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. Therefore we increased the overlap between those discs that turn outwards – a modification that leads to stripeless cuts in light and young material. Vice versa, a larger gap between the blades that turn towards each other encourages the smooth flow of large masses to the rear.EC F R 15 Seite 08 Bild 0002
Spreading across the full width: The EasyCut models, with discs spinning in the ‘B’ sense of rotation, spread the material across the machine width. All discs spin in pairs. Material that is spread across the full machine width will dry faster and more evenly.EC F R 15 Seite 09 Bild 0001

 

easycut r
  • 3.60 m or 4.04 m (10'4" or 13'3") working width
  • Double windrowing or spreading
  • Hydraulic suspension control as an option
  • Excellent value for Money
The high-capacity EasyCut R 360 and R 400 mowers are mounted machines that score on enormous work rates and productivity, performing equally well in forage harvesting and field extensification.EC F R 15 Seite 24 Bild 0001
Three-point headstock: These two models have particularly strong headstocks. They can move sideways and the lower link pins can be refitted to adjust to suit different tractor track widths and to team up with a front mower.EC F R 15 Seite 26 Bild 0002
Spreading across the full width: Spreading the material leads to faster wilting because it exposes a larger surface to the sun and wind, leading to very high-quality forage and fewer losses.EC F R 15 Seite 25 Bild 0002
Spreading across the full width (B sense of rotation): The discs on the EasyCut R 360 and R 400 models work in pairs, with two discs running with opposed action spreading the material across the full width. Forming two swaths (A sense of rotation): This is an option for those who try to avoid running over the cut crops. These models have only the central discs run with opposed action, producing two swaths.EC F R 15 Seite 25 Bild 0001
EasyCut R 360 in road transport: The EasyCut R 360 model swings up and beyond TDC behind and very close to the tractor improving ride comfort especially on small tractors.EC F R 15 Seite 27 Bild 0002
The EasyCut R 400 moves hydraulically into the transport position behind the tractor and folds up the front curtain. This turns the machine into a narrow, low-profile transport unit for smooth passage underneath bridges and through gates and for safe travel on public roads.EC F R 15 Seite 27 Bild 0005

 

  • Manual or hydraulic ground pressure control
  • Low-maintenance and frictional driveline without belts
  • KRONE SafeCut cutterbar protection is a standard feature
  • Cantilever guards ensure smooth crop flows
Are you looking for a powerful mower that works at a width of about 3 metres (9'10")? Then the KRONE EasyCut R 280 and R 320 disc mowers with DuoGrip system are for you. Their DuoGrip centre-of-gravity suspension system with manual or hydraulic spring control, the unique impact damage protection system and the optimized cutterbar for stripeless cuts are just some of the selling points.EC F R 15 Seite 20 Bild 0001
The EasyCut R 280 and EasyCut R 320 models use springs to provide suspension. The tension is adjusted manually or hydraulically as an option to optimize ground contour following at high work rates.EC F R 15 Seite 21 Bild 0003
Covering the full width: EasyCut R 280 and EasyCut R 320 have adjustable lower link pins that allow the machine to run offset behind the tractor and cut at full width at any track width, on side slopes and in combination with a front mower.EC F R 15 Seite 20 Bild 0003
Automatic folding: When the mower moves into transport position, the guard folds back to reduce the transport height. When the machines lowers into work position the guard, too, moves back into work position.EC F R 15 Seite 23 Bild 0003
The trailer bed up/down service will do: A single-acting ram with accumulator is fine to raise the EasyCut R 280 and R 320 models into headland and transport position.EC F R 15 Seite 23 Bild 0001
A unique KRONE design: The vertical storage position saves space in the machine shed. The optional stands give the machine good footing and are useful for attachment and removal. But of course EasyCut R 280 and EasyCut R 320 also store in horizontal position.EC F R 15 Seite 23 Bild 0002

 

  • Continuous crop flow from 25 cm (10") diameters
  • High throughputs from powered processor rollers
  • Top-notch conditioning effect from meshing surfaces
  • Great longevity from rubber coating
CR roller conditioner: The Chevron profiled crop processor rollers interlock to provide thorough treatment across the full working width. The gap between the rollers, the pressure and the swath boards are steplessly adjustable.EC F R 15 Seite 49 Bild 0004
600 rpm or 900 rpm: Efficient and powerful drive for the CV conditioner comes from this fourgroove belt. Change the speed from 600 rpm to 900 rpm and vice versa by swapping the pulley.EC F R 15 Seite 48 Bild 0004
Minimum space: Stands are available as an option to store the machine either in work or transport position – saving space in the machine shed.EC F R 15 Seite 33 Bild 0001
Thorough protection: The folding side and front guards are lined by rubber strips that protect them from damage when colliding with obstacles.EC F R 15 Seite 32 Bild 0003

 

  • Easy and quick operation
  • Optional wide spreading crop deflectors
  • Infinitely variable windrow width
  • Mechanical gearbox, variable intensity conditioning
The KRONE CV rotor with V-shaped and grippy steel tines spreads the crop at the full working width. Its massive 64 cm (2'1") diameter and the helical arrangement of the tines warrant a continuous crop flow, high throughputs and superior conditioning. EC F R 15 Seite 28 Bild 0001
Full-width treatment: The tine conditioners on each mower span across the work width from the left to the right top hat, providing a uniform and consistent crop flow across the full width and giving optimum conditioning.EC F R 15 Seite 28 Bild 0002
Firm grip on the crop: Made from hardened steel and mounted at a steep angle, the V-shape steel tines give intensive treatment and powerful action. The tines pivot to break back when they hit an object whereas their restricted forward angle increases the pivot pin’s longevity.EC F R 15 Seite 29 Bild 0005
Adjustable baffle plate The lever notches the plate/tine clearance to the required setting. As you reduce the gap you increase the intensity of conditioning.EC F R 15 Seite 29 Bild 0002
Mechanical gearbox: Select 900 rpm for intensive treatment and 600 rpm for less intensive conditioning. Setting the speed is easy from the gearshift lever.EC F R 15 Seite 29 Bild 0003
Two suspension springs: Their conditioners make EasyCut R 280 CV and EasyCut R 320 CV heavier machines, which require two springs to receive proper suspension. The springs adjust manually or hydraulically as an option.EC F R 15 Seite 33 Bild 0003
Minimum space: Stands are available as an option to store the machine either in work or transport position – saving space in the machine shed.EC F R 15 Seite 33 Bild 0001
Thorough protection: The folding side and front guards are lined by rubber strips that protect them from damage when colliding with obstacles.EC F R 15 Seite 32 Bild 0003

 

the cutterbar
  • Fully welded cutterbar – strong in build, leak proof and permanently lubricated
  • Long-lasting satellite gears with massive spur gears make for quiet running and maximum efficiency
  • No inner shoe – no blockages
Fully welded and permanently lubricated, the cutterbar shows no leaks and no deformations even after many years of service. Its massive and oilimmersed spur gears impress by very quiet and reliable running under constant peak loading. And of course quick-change blades and the SafeCut cutterbar protection system are standard specification.
Leak proof and robust: To meet the highest quality standards we use advanced robot welding and CNC technology in the manufacture of our fully welded and permanently lubricated cutterbars. After all, the cutterbar is at the heart of every disc mower.EC F R 15 Seite 07 Bild 0002
The original: The KRONE developed satellite driveline comprises massive spur gears with up to 66 teeth which transfer the power all the way down to the very last disc. Revolving at lower speeds, the large-diameter gears always have a number of teeth in mesh at any one time, giving quiet running, ultimate efficiency and maximum longevity. With each of the auxiliary gears driving just one disc, it is exposed to only minimum mechanical strain.EC F R 15 Seite 06 Bild 0002

 

safe road travel
  • The machine folds beyond the vertical transport position
    Low transport height, optimum weight distribution, excellent visibility
  • Hydraulic headland control
    No need to operate the tractor linkage
  • Huge angle of travel
Implementing a large work width on a mower poses a special challenge to the designers who have to reconcile demands for high work rates with those for good transport and contouring qualities. The solutions are reflected by the KRONE Z-form, the low pivot point, the over-centre transport position and the headland position that does not require operating the tractor’s link arms. KRONE disc mowers offer safe travel and best cuts even in difficult conditions.
Fold it from the seat: The machine swings hydraulically into an upright position and beyond the dead centre point. The single-acting ram on the EasyCut R 280 and R 320 models employs an accumulator to move the machine into a 110° position whereas the EasyCut R 320 CV and R 360 models use a double-acting ram to swing the machine into a 124° position. Both versions fold the mower actively up and down for smooth and easy changeovers.EC F R 15 Seite 19 Bild 0002
Large pivoting range: Designed like a Z, the arm offers 29°/20° up/down travel for easy bank and verge mowing.EC F R 15 Seite 18 Bild 0002
Low transport height: Folding into transport position, the ‘Z’-arm pivots low to the ground to reduce transport height. At the same time, its high ground clearance makes for safe travel on worn-out roads.EC F R 15 Seite 19 Bild 0004
Safe road travel: The special design shifts the machine weight to the middle of the tractor, distributing it more uniformly across the axle and the linkage for better ride quality and better visibility in the rear-view mirrors. There is nothing in the way that might obstruct your view.EC F R 15 Seite 19 Bild 0003

 

high work rates and clean cuts

Break-back system and minimum ground pressure

  • Central control suspension springs guarantee uniform cuts at optimum pressure
  • Control the pressure by refitting pins and without tools
  • Adjust the pressure hydraulically and on the move (option)
  • Two-fold impact damage protection
A clean cut is fundamental for producing clean forage and it is attributed to the special design of the cutterbar and also of the suspension. The special KRONE DuoGrip suspension system suspends the disc mower in its centre of gravity and provides lateral guidance at the same time. Maintaining a consistent ground pressure across the full work width, the design produces cleanest cuts whilst resulting in light pull and optimum side control.
Adjusting the ground pressure is easy: Adjusting the spring tension manually is easy and straightforward, because you simply refi t the pin. Increase the tension to decrease the ground pressure.
Hydraulic control from the seat: Enjoy superior operator comfort from the hydraulic suspension control system. Adjust the pressure flexibly on the move and release the spring tension from the seat before you remove the mower from the tractor.
Fully protected: The standard impact damage protection system on EasyCut R models gives you peace of mind as you work along borders, fences and hedges and suddenly collide with an obstacle. When the system trips, the mower swings 1.20 m (3'11") to the rear and up to 40 cm (1'3") up and clear out of any obstacle. After the obstacle has been passed, the mower swings automatically back into work position.

 

Videos Documents