Today's HoursWednesday 8:30AM - 5:00PM
| Monday | 8:30AM - 5:00PM |
| Tuesday | 8:30AM - 5:00PM |
| Wednesday | 8:30AM - 5:00PM |
| Thursday | 8:30AM - 5:00PM |
| friday | 8:30AM - 5:00PM |
| Saturday | 8:30AM - noon |
| Sunday | Closed |
Tel: 
22 Callaghan Road, Lindsay, ON K9V 4R4
Krone Comprima Plus
- The balers with stronger components to combat extreme conditions
- Compact, high-capacity and all-round machines for all crops
- Semi-variable or fully variable bale chamber
- Semi-variable for 1.25-1.50 m bale Diameters and maximum flexibility
- Fully variable for all bale sizes and 1.00-1.50 m diameters
- Each chamber is available for the combination baler wrappers
- Stronger NovoGrip belt-and-slat elevator for perfect bale roll and high densities in all crops
- EasyFlow pick-up with w-lined tines for clean and effective gathering
- XCut cutting system with 17 or 26 blades for smooth and precise cuts
- Massive cut-and-feed rotor from Hardox steel for high throughputs and reduced wear
- Net wrap or peripheral film wrap
- Standard auto lubricator for oil and grease for reduced service and maintenance
The Comprima F and CF Plus from KRONE are fixed chamber balers with semi-variable bale chambers. These machines produce high-density and well-shaped bales of six different diameters. Built from heavy-duty components they are extremely solid and sturdy. They are also very cost-effective and exceptionally easy to operate and service – thanks to their uncluttered build and design. |
The Comprima F 155 XC Plus model produces 1.25-1.50 m diameter bales. Operators simply set the required diameter in 5 cm increments on an easy-to-use system. The semi-variable bale chamber produces a softer and very small core – also in large-diameter bales. This gives the bales a great density, helps them retain their shape and makes them heavier. |
Three components are key to the semi-variable bale chamber: the tensioning arm, the suspension strut and the tensioning kinematics. The top tensioning arm is pulled down and as it does so, it increases the available space inside the chamber and allows more material to enter. Simply insert a bolt for easy limiting the path of the tensioning rocker and thus setting the bale diameter. |
|
|
After the bale chamber opens the bale is transferred to the wrapping table by a lever. Activated only after the gauge roller senses a high weight, this lever transfers the bale safely to the wrapping table. |
The combination baler wrapper Comprima CF 155 XC Xtreme has all the features of the Comprima F X-treme plus a powerful wrapper with twin-arms which orbit at 36 rpm. The wrapping table forms a deep cradle and has big bobbins on the sides that ensure the bale is eff ectively rolled during the wrapping cycle even when the conditions are more than diffi cult. The table can also be used for depositing the bales in pairs.
Uncompromised stability is the key landmark feature of KRONE Comprima V und CV Plus. These machines are designed to successfully combat the most extreme conditions in non-stop operation. Bale diameters are steplessly set from 1 m to 1.5 m and the pressure is changed electrically from the cab for convenient adjustment to different crops and conditions. |
The Comprima V 150 XC Plus with variable bale chamber allows operators to enter the required bale diameter to the operator terminal from the comfort of the seat.The diameters can be set steplessly from 1.00 m to 1.50 m which gives users greater flexibility. Smaller bale sizes are often preferred in silage whereas larger bales are more typical in hay and straw. |
The bale diameter is measured by an angle sensor on the tensioning arm and the information is fed to the operator terminal so you can change the setting from the cab. The increasing pressure on the elevator ensures a uniform density. |
The baling pressure is varied electrically from the cab-based terminal. This way, you can adjust the density easily and conveniently to the conditions at hand. |
The Comprima CV 150 XC Plus baler wrapper has a powerful wrapper with twin-arms orbiting at up to 36 rpm. The wrapping table forms a deep cradle and has large guide rollers on the sides to ensure the bale is consistently rolled during the wrapping process even when the conditions are more than difficult. |
The EasyFlow pick-up pivots sideways and is known as the pick-up that clears the field effectively even in the most difficult conditions and at high work rates. More than that, its rugged build with very few moving parts gives an exceptionally dependable performance. |
KRONE has good reasons to opt against cam track control for the EasyFlow pick-up tines. Instead of using many moving parts that are prone to wear, KRONE prefers special strippers that ensure the angle and length of the tines is always correct. The tines are 6 mm thick and have large-diameter coils – two properties that make them particularly resistant and hard-wearing. Arranged in five helical rows on the EasyFlow rotor and spaced at narrow 55 mm, they allow EasyFlow to pick up even short and heavy crops without losses. |
The crop press roller supports the work of the pick-up by detecting the size of the swath and preparing it for effective gathering. Its height is adjusted easily to adapt to the swath volume and ground speed.. |
The EasyFlow pick-up is guided by two small side-mounted gauge wheels. Its height is changed by refitting a pin in a hole pattern. The guide wheels are castering and can pivot flexibly for The working height of the pick-up is set without tools in a hole pattern. |
The XCut cutting system comprises the feed rotor and the blade cassette for superior crop feeds, quiet running and exceptional cutting quality. The components in the blade cassette are also made from heard-wearing materials to match the Hardox steel rotor cutter. |
Should the feed chamber block up in difficult conditions, the operator simply lowers and raises the blade cassette hydraulically to remove the blockage. If the unit is specified with hydraulic blade group control, the blades will also be retracted automatically to clear the chamber and allow the crop to flow again. |
Featuring three helical rows of tines and a massive 53 cm diameter, the powerful XCut rotor has the capacity to provide consistent crop flows and precision cuts while spreading the material across the full width of the feed chamber, which is essential for forming firm edges. The rotor is made from hard tempered material (Hardox steel) for extra longevity. |
The cutting rotor is powered by oversize spur wheels which cope with the highest possible loads. They provide the rotor with the most dependable drive even in less than uniform swaths. |
NovoGrip is an endless belt-and-slat elevator that is made up of rubber fabric belts and horizontal metal slats that form high-density and well-shaped bales. All Comprima Plus models have extra strong NovoGrip components. NovoGrip offers ultimate strength and longevity and forms perfect bales from the heaviest silage. |
The robust and endless rubber fabric belts with metal slats achieve unsurpassed baling densities. The system relies on an extremely high tension of the belts that effectively transfers the drive power to the bale. The slat holders mount well protected between the rubber lugs and are bolted in bushes for great durability. |
The core of a NovoGrip belt is made up of tear-resistant layers of plastic and fabric to which two layers of rubber lugs are vulcanized. This particular design accounts for the unique strength, elasticity, and longevity of these belts. |
The NovoGrip slat and belt conveyors are driven and guided via large and wide guide and drive wheels. which ensure the belt copes with the highest loads and is extremely durable. The belt-and-slat elevator at the front has even two drives so the variable bale chamber is able to handle the most difficult conditions. |
The strong 1½-inch chains withstand any strain. Springloaded chain tensioners and auto lubrication and greasing reduce service and maintenance and extend chain life. Controlled by a flow meter, the chain oil is applied at just the proper rate. |
The net / film wrapping system on a Comprima Plus is extremely reliable and easy to use. |
The net wrapping is standard specification but you can also opt for base coat of film wrapping. This type of stretch film, which runs 1.28 m wide and is adhesive on one side, increases the quality of silage bales, because it exerts a greater pressure on the outer layers of the bale, reducing the amount of air trapped in it and making it easier to break up on the feeding floor. |
The tying unit applies the net or film across the full width of the bale and covers its edges. KRONE has eliminated stretching the film at the start of tying and gathering it before cutting, which saves time and material. |
After the net or film is applied, the knife cuts the material automatically and across the full width. |
The Comprima Plus wrapper wraps the bales fast and reliably – even in difficult conditions and in sloping fields. The entire wrapping cycle is fully automated. |
The table on the Comprima Plus wrapper forms a deep cradle and has big bobbins on either side that fi x the faces of the bale as it is being rolled – an ideal setup for dependable operation in sloping fi elds. A bale weighing system can be integrated in the table as an option. The system logs the individual and total bale weights and displays the readings on the in-cab screen. |
The wrapper has powerful twin dispensers to match the high output rates of Comprima Plus. Orbiting at 36rpm, the highperformance dispensers finish the wrapping cycle in no time at all. |
The dispenser stretches the film to a 50% or 70% pre-stretch, depending on the gearwheel pairing of the drive. This ensures the bale density is maintained and the film is used efficiently. The dispenser has integrated film break detection relying on sensors that detect magnetic fields. When the system detects a film break, it shuts off the defective roll and wrapping continues with only the other dispenser in action. |
There are two large film roll compartments on either side of the machine which store up 12 spare rolls of film, protecting them from rain and dust. Powerful LED lights are also available as an option in this area. The film roll holders roll holders fold down for convenient removal and refills. |
The rubber mat is standard specification and protects the film from damage as it is placed on the ground. Equipped with a roll, the optional bale turner turns the bale gently on its face. It does not need to be removed it is not required: simply fold it away close to the wrapping table. |
If not used for wrapping, the table can be used for depositing the bales in pairs, which leads to great time savings in clearing the field. |
Designed to deliver highest densities and outputs, Comprima Plus offers even more. |
The sprockets have large diameters to minimize the strain on the chain. This in combination with the automatic chain tensioner leads to a significant reduction of wear and thus to time and cost savings. |
A central chain lubricator with piston pump and a large 7l reservoir reduce the time spent on servicing the machine to a minimum and makes Comprima Plus an even more reliable and cost-effective machine. Controlled by a flow meter, the chain oil is applied at just the proper rate. |
|
|
Comprima Plus has heavy-duty spherical roller bearings with enhanced sealing. The bearings are auto lubricated for long service life. |
Auto lubricators are a standard feature on Comprima Plus. Grouped in a bank, all lubrication feed lines are automatically supplied from the central grease reservoir and apply the grease on demand to the individual points. The system makes sure all nipples get the necessary attention, including those that are diffi cult to get at - a detail that helps eliminate potential downtime. The auto lubricator minimizes the time you spend on servicing the machine, boosts your productivity, reliability and machine life. |
The side panels open wide offering easy access to all drives, components and assemblies. Servicing the machine is fast and safe also at night, thanks to the LED lights under the side panels. Furthermore, LED lights around the chamber net/film unit make working at night also as easy as during the day.
Variable – hitch ring or ball attachment |
Comprima Plus has a standard 40 mm hitch ring for bottom- or top-mount attachment. A notch system adjusts the drawbar quickly to the required attachment height. In addition to this, there is a choice of three further hitch options that meet specific needs in specific countries. |
There is also an 80 ball hitch available for Comprima Plus for bottom attachment. This warrants smoothest rides, better manoeuvrability and minimum wear. |
A compressed air brake system is standard specification on both the single axle and tandem axle models. Machines for export can also be equipped with hydraulic brakes. |
Only the Comprima F und V Plus models have the single axle. You can choose from a large range of various tyre options. The standard size is 15.0/55-17; but 500/50-17 and 500/55-20 tyres are also available as an option. |
A tandem axle is standard specification on the CF and CV combination baler and wrappers and an option on the F and V models. Tandem axles offer greater tongue loads, smoother rides and better road stability. As they offer a larger contact area, they also reduce rutting and protect the soil. There are three different tyre sizes from 500/55 R 20 to 600/50 R 22.5 available for this axle assembly. |
The DS 500 operator terminal with 5.7inch terminal is a standard feature. The unit allows operators to retrieve and set the bale diameter and the number of wraps and also start the tying cycle – either from the touch screen or from twelve function keys. The unit also features two bale counters, one hour counter plus a sensor and actuator error diagnosing feature. |
If you want a higher level of comfort, you will find the optional CCI 800 Isobus terminal with 8inch touch screen an intriguing option. From here you retrieve information on service and diagnosing functions. The CCI 800 screen displays the camera feeds in one view and the machine user interface in another. The screen switches automatically two camera views when the chamber film wrapping cycle starts. |
Maximum operator comfort is off ered by the optional CCI 1200 ISOBUS terminal with 12inch colour touch screen. You can enter the settings either by tapping the screen buttons or using the function keys next to the screen. This terminal has two camera ports. The screen is split so you can view the camera feeds and the machine functions at the same time. The screen switches automatically two camera views when the chamber fi lm wrapping cycle starts. |
If the terminal on the tractor is ISOBUS compatible, it can log into the onboard electronic system of Comprima Plus. There is no need for another extra terminal – a great boon for the user. |
TIM (Tractor Implement Management) allows your machine to communicate with the tractor and control it. At this point the tractor is halted automatically too. After chamber film or net has been applied, the rear door opens, the bale is ejected and the door closes again. All the operator needs to do for starting the next cycle is pull off the tractor. TIM reduces operator fatigue, downtime, fuel consumption and leads to more uniform bales and boosts your productivity. The combination baler wrappers have TIM as standard the solo machines as an optional feature. |
| Name | Link |
| Brochure PDF | Download |
Videos
Documents
Comprima_Plus_EN_209023130_web.pdf↵
